50HZ pneumatic control Fully automatic tablet blister packing
machine for re - sealing PLC
BLISTER PACKING MACHINE ALU/PVC/ALU PLATE TYPE AUTOMATIC BLISTER
MACHINE MODEL DPP-260H3 is our latest improved model. The gripping
and feeding mechanism adopts leading screw drive ,which is
controlled independently by servomotor,with characteristics of
stable performance and accurate synchronization .The ranger of
stroke can be set freely through the PLC control panel .The whole
machine is an assemblage of independent components,which makes it
accessible to an elevator or partitioned clean room workshop.
this machine is used for re-sealing with forming aluminum foil
after alu /pvc packing is completed ,which reinforces the sealing
and light shieleding and also promotes the grade of packaging .(it
is suitable for alu/pvc and alu/alu packing)
It’s Performance Characteristics:
1. The integrated machine can be packed separately to move into the
lift with the width 2.2m and into the divided purifying workshop,
it is easy to assemble the clamping screw.
2. Mould and guide rail should be designed separately, when
changing mould, it only to change whole guide rail and mould
pressing plate, it's easy to disassemble.
3. Photoelectric compensating mechanism is used to the diagrams and
letters register on the printed alu foil.
4. Main motor adopts frequency speed regulation: can setting punch
frequency according to the different distances of stroke and
different filling compound.
5. Manipulator grip feeding mechanism is drove by precision silk
pole, controlled separately by servo motor with running smoothly
and synchronous accuracy. The length of stroke can be designed
according to the customer's requirement, also it can adjust through
PLC control panel.
6. The forming heating plate can automatically open and close, the
machine can start working with a time-delay to limit the plastic
waste in one round of stroke after putting down the heat plate.
Because it adopts contact type register heating, the heating power
and temperature is reduced, power is saved and stability of blister
sheet becomes stronger.
7. Air-cushion heat-sealing: when the machine stop, the net web
plate lifts automatically by cylinder thus avoiding the blister
deformation caused by heating radiation during staying of PVC, easy
to clean net web plate and playing a role of slowing down super
pressure for the benefit of extension of its service life.
8. Upper and lower couple contact heat-sealing: both the obverse
and inverse plates are point-checkered shape (also can be line
heat-sealing), because they have equal stress, the plates are flat
and improve the sealing performance.
9. Double-acting feeder: improve the feeding rate of
irregular-shaped tablet and feeding rate is also raised by high
speed operation (suitable for AL/PL packing).
10. At the end or cutting stop of PVC, the machine has functions of
auto-alarm and auto-stop and is associated with emergency stop
safety device. Therefore, it improves the safety of operation when
adjusting and changing moulds.
12. All the parts including second feeding hopper which contact
with medicine directly, are made of stainless steel and innocuous
materials, conforms to “GMP” requirement.
Main Technical Parameters:
Max. Punch Speed:
AL/PL: 50 times/min
AL/PL/AL: 35 times/min
Max. Production Capacity:
AL/PL: 350 thous. Pcs./h
AL/PL/AL: 150 thous. Pcs./h
Adjustable range of stroke:
Standard dispose≤160mm (according to the customers' requirement)
Max. Forming Area:
Max. Forming Depth:
Note: the width of packaging
material ranges 130-260mm
Medicine PVC: 260x0.25 (0.15-0.5mm)
Heat-sealing PTP: 260x0.02mm
Three Phases Four Wires 380V 50HZ (220V 60HZ)
Main Motor Power:
Forming Upper and Lower Heat power:
Heat-sealing Heat Power:
Air Pump (Air Compressor) Volume:
≥0.38m3 / min
Dimensions of overall machine:
Dimensions of separate packaging cases:
Suitable Packaging Material Specification:
Roll type packaging
PVC / PVDC / PET / PE / ACLAK
Single gelatinization alu foil (PTP) back
0.2-0.5mm (commonly adopts 0.25-0.30mm)
Roll inner diameter
Roll outer diameter